Troubleshooting - Philips ColourChaser Touch Installation Manual

Troubleshooting

Problem Probable Cause
No response from Cables reversed at
controller when on/ power supply
off button is pressed
Dynamic designs do Other lighting
not execute when settings have been
a preset button is saved in the preset
pressed memory
One or more lights Interference in
have the wrong DMX data line
color, flashes, or
blinks randomly Data line length or
fixture limit exceeded
Lights do not Incorrect fixture
respond to setup
controller
Fixtures addressed
incorrectly
Solution
Verify that patch cable from
controller is connected to
power supply's OUT socket
Press and hold the preset
button for about 4 seconds
until the controller sounds
twice
Verify that the end of the data
line is terminated
Add a DMX splitter/amplifier
to the data line
Configure controller
Verify that fixtures are addressed
as per the Fixture setup dialog
Philips ColourChaser Touch Manual 17