Replacing The Imaging Oil Filters - HP Indigo BID Washer User Manual

Figure 2-11. Imaging oil tank
2
Figure 2-12. Four liter imaging oil bottle
3
4
5

Replacing the imaging oil filters

Requirements:
●
●
●
●
WARNING! It is recommended that you wear rubber gloves while handling imaging oil.
There are two filters. Remove the inner one first and then the outer one. Mount the new
filters in reverse order.
ENWW
Imaging oil tank cap
Remove the tank cap.
Pour in one 4-liter (1.06-gallon) oil bottle (see the HP Indigo part number on page 23).
Put the imaging oil tank cap on and then close it.
Close the imaging oil tank door.
Filter extractor (HP Indigo part number on page 23)
Two imaging oil filters (HP Indigo part number on page 23)
Imaging oil (HP Indigo part number on page 23)
Rubber gloves (HP Indigo part number on page 24)
Maintaining the BID Washer 19