6.1
Check head nozzles (Maintenance mode 09)
Check head nozzles, referring to
6.2
Adjustment of vertical print lines/software correction for inclination/
corrugation/ruled lines (Maintenance mode 65)
Refer to
Chapter 5, Section
6.3
Update paper feeding correction values (Maintenance mode 58)
Refer to
Chapter 5, Section
6.4
Adjust margins in borderless printing (Maintenance mode 66)
Refer to
Chapter 5, Section
6.5
Check printing
Update the paper feeding correction value
Check the test patterns, referring to
Adjustment of vertical print lines/software correction for inclination/corrugation/ruled
lines
Check the test patterns, referring to
Adjust margins in borderless printing
Check the test patterns, referring to
Section
2.3.
1.3.23.
1.3.19.
1.3.24.
Chapter 5, Section
Chapter 5, Section
Chapter 5, Section
4-25
1.3.19.
1.3.23.
1.3.24.
Confidential