Configuring Wireless Network - D-Link DAP-1610 Quick Installation Manual

DAP-1610

Configuring Wireless Network

This configuration step is available for the Access point and Repeater
modes.
1. On the Wireless Network 2.4 GHz page, in the Network name field,
specify your own name for the wireless network in the 2.4GHz band or
leave the value suggested by the extender.
2. In the Password field, specify your own password for access to the
wireless network or leave the value suggested by the extender (WPS PIN
of the device, see the barcode label).
3. You can restore the parameters of the wireless network specified before
resetting to factory defaults. To do this, click the RESTORE button.
4. Click the NEXT button.
5. On the Wireless Network 5 GHz page, specify needed settings for the
wireless network in the 5GHz band and click the NEXT button.
Quick Installation Guide
18