Siemens S7-1500 Manual page 12

Product overview
2.1 Properties
The module supports the following functions:
Table 2- 1 Version dependencies of the module functions
Function
Firmware update
Identification data I&M0 to I&M3
Parameter assignment in RUN
Module-internal Shared Output (MSO)
Configurable submodules/submodules
for shared device
You can configure the module with STEP 7 and with a GSD file.
Accessories
The following components are supplied with the module and can also be ordered separately
as spare parts:
● Labeling strips
● U connector
● Universal front door
Other components
The following component can be ordered separately:
Front connectors, including potential jumpers and cable ties
For more information on accessories, refer to the S7-1500, ET 200MP system manual
(https://support.industry.siemens.com/cs/ww/en/view/59191792).
12
Firmware version of
the module
as of V13 SP1 with
V1.0.0 or higher
V1.0.0 or higher
V1.0.0 or higher
V1.0.0 or higher
(PROFINET IO only)
V1.0.0 or higher
(PROFINET IO only)
Digital output module DQ 16x230VAC/1A ST Triac (6ES7522-5FH00-0AB0)
Configuration software
STEP 7
STEP 7 , V12 or higher
HSP 0119
STEP 7 V5.5 SP3 or higher
X
X
X
X
(PROFINET IO only)
X
(PROFINET IO only)
Manual, 09/2016, A5E34934069-AB
GSD file in
--- / X
--- / X
X
X
X