Digital Audio Setup Page - Silvercrest KH6500-06/08-V1 Operating Instructions Manual

LAST MEMORY
* * GENERAL SETUP PAGE * * * * GENERAL SETUP PAGE * * * * GENERAL SETUP PAGE * *
TV DISPLAY TV DISPLAY TV DISPLAY WIDE WIDE WIDE
ANGLE MARK ANGLE MARK ANGLE MARK OFF OFF OFF
OSD LANGUAGE OSD LANGUAGE OSD LANGUAGE ENG ENG ENG
CLOSED CAPTIONS CLOSED CAPTIONS CLOSED CAPTIONS OFF OFF OFF
SCREEN SAVER SCREEN SAVER SCREEN SAVER ON ON ON
LAST MEMORY LAST MEMORY LAST MEMORY OFF OFF OFF ON ON ON
OFF OFF OFF
SET LAST MEMORY STATE SET LAST MEMORY STATE SET LAST MEMORY STATE
• Select the setting ON to playback a disc from
the previous halted position after removal and
re-insertion.
• with the setting OFF disc playback starts from
the beginning.
Note:
When the DVD player is switched off the
saved position is not retained.

8.2 DIGITAL AUDIO SETUP PAGE

DIGITAL OUTPUT
* * DIGITAL AUDIO SETUP PAGE * * * * DIGITAL AUDIO SETUP PAGE * * * * DIGITAL AUDIO SETUP PAGE * *
DIGITAL OUTPUT DIGITAL OUTPUT DIGITAL OUTPUT RAW RAW RAW OFF OFF OFF
LPCM OUTPUT LPCM OUTPUT LPCM OUTPUT 48 K 48 K 48 K RAW RAW RAW
PCM PCM PCM
SETUP SPDIF SETUP SPDIF SETUP SPDIF
Select the input DIGITAL OUTPUT to set the SPDIF
audio output signal.
OFF: Select OFF when there is to be
no digital signal output.
PCM: Select PCM (Pulse Code Modu-
lation) when a connection to a
digital amplifier/receiver exists.
Your DVD player transmits,
through the PCM signal, the
same audio formats that are ren-
dered on the disc. In addition
there will be an audio signal out-
put via the left/right connection.
RAW: The DVD player outputs the raw
data of the Dolby Digital sound
(default setting).
* * * * DIGITAL AUDIO SETUP PAGE * * DIGITAL AUDIO SETUP PAGE * * DIGITAL AUDIO SETUP PAGE
DIGITAL OUTPUT DIGITAL OUTPUT DIGITAL OUTPUT PCM PCM PCM
LPCM OUTPUT LPCM OUTPUT LPCM OUTPUT 48 K 48 K 48 K
SETUP LPCM SETUP LPCM SETUP LPCM
Select the input LPCM OUTPUT to set the sampling
frequency for the processing of the raw data.
48 K:
96 K:
Note:
The LPCM OUTPUT function is only available if you
have set the SPDIF audio output signal to PCM.
DOLBY DIGITAL SETUP
* * DOLBY DIGITAL SETUP * * * * DOLBY DIGITAL SETUP * * * * DOLBY DIGITAL SETUP * *
DUAL MONO DUAL MONO DUAL MONO STR STR STR
DYNAMIC DYNAMIC DYNAMIC
DUAL MONO (1 + 1) SETUP DUAL MONO (1 + 1) SETUP DUAL MONO (1 + 1) SETUP
• Select the input DUAL MONO to set the Dolby
Digital output either to STEREO, L-MONO,
R-MONO or MIX-MONO .
* * DOLBY DIGITAL SETUP * * * * DOLBY DIGITAL SETUP * * * * DOLBY DIGITAL SETUP * *
DUAL MONO DUAL MONO DUAL MONO STR STR STR
DYNAMIC DYNAMIC DYNAMIC
DYN. COMPR. OFF DYN. COMPR. OFF DYN. COMPR. OFF
• Select the input DYNAMIC to enable an optimal
sound replay with reduced volume.
• In the setting FULL the louder passages will be
surpressed and the softer passages will be play-
ed back louder.
Note:
This function is only possible when using a
digital audio component.
- 14 -
* * * *
48 K 48 K 48 K
96 K 96 K 96 K
Default setting.
Only for DVDs with the corre-
sponding sampling frequency.
STEREO STEREO STEREO
L-MONO L-MONO L-MONO
R-MONO R-MONO R-MONO
MIX - MONO MIX - MONO MIX - MONO
FULL
3/4
1/2
1/4
OFF