Activating The Remote Control Battery; Changing The Remote Control Battery; Providing Mains Power; Vhf Wire Antenna - Silvercrest KH 2600 Operating Instructions Manual

Setting up and connecting

Activating the remote control battery

The remote control battery is already inserted when delivered.
Activate the battery by removing the isolation strip.

Changing the remote control battery

Press, with the fi ngernail, the recess (A) to the right
and, at the same time, pull the battery compartment
out.
Insert a 3 V battery type CR 2032 in the battery
compartment. The side with the marking "+" points
upwards.
Slide the battery compartment completely back into
the remote control.

Providing mains power

Place the device approx. 40 to 50 cm away from your head (i.e. on the
bedside table).
Plug the mains power plug into a wall socket. In the display
day (0:00 o'clock) and the temperature will be shown.

VHF wire antenna

For VHF reception completely unfold the wire antenna

Connecting the headphones

If required you can connect headphones (with a 3.5 mm jackplug) to the
connection socket
switch off automatically.
KH 2600
21
on the rear panel of the device. The speakers then
4
the time of
24
.
13
GB
IE