Assembly
GB
IE
Step 1
Screw three single locking pins
Place two wood plugs
Insert three adapter sleeves
screwdriver line up the adaptor sleeves
edge of the side panel
Then, bring the front panel
enter the holes on the left edge of the side panel
When done, screw all three adapter sleeves
clamped into the adapter sleeves and the panels are seated fi rmly together and at right angles.
Step 2
Screw three single locking pins
Place two wood plugs
Insert three adapter sleeves
screwdriver line up the adaptor sleeves
edge of the side panel
10
with a screwdriver into the prepared holes on the left front panel
D
into the holes of the front panel
B
E
into the three large holes of the left side panel
E
so that the arrow on the adaptor sleeves points to the outer
.
D
D
B
2
D
and side panel
together at right angles, so that the locking pins
2
E
to the right with the screwdriver until the locking pins are
with a screwdriver into the prepared holes on the right front panel
D
into the holes of the front panel
B
E
into the three large holes of the right side panel
E
so that the arrow on the adaptor sleeves points to the outer
8
.
D
8
D
E
D
.
2
E
.
4
.
B
4
Assembly
.
2
. Thereby, with the
D
.
4
8
. Thereby, with the
SEKU 2000 A1