Siemens OptiPoint 410 Operating Instructions Manual page 22

Making Calls – Basic Functions
Step by Step
FWD-ALL-EXT off
Next forwarding type? >
FWD-ALL-EXT off
Enter destination:
program/service
Destinations?
Call forwarding?
Next forwarding type? >
Next forwarding type? >
Next forwarding type? >
>
Enter destination:
>
Save?
22
:
To select the next station variable forwarding type.
Output on first line display.
Output on second line display.
or
>
To edit the current station variable forwarding type.
Output on first line display.
Output on second line display.
>
Programming/changing the forwarding destination
Press the key. The lamp lights up.
:
Confirm.
:
Confirm. Display shows "Station variable forwarding".
:
Confirm. Display shows " Station fixed forwarding".
:
Confirm. Display shows "Forwarding for internal".
>
Open a forwarding type, for example, "Forwarding for in-
ternal".
:
>
p
Enter the number of the forwarding destination. Any
destination previously saved will be overwritten
:
Confirm when the complete number has been entered.
To select a different forwarding type, proceed as de-
scribed on
If station variable forwarding was previously pro-
grammed and activated, it is deactivated and the for-
warding destination is deleted (for exception, see
page 21). Station fixed forwarding is deactivated.
Deleting a forwarding destination
A station variable forwarding destination is automatical-
ly deleted when the forwarding type is switched off.
page 21.