Using The Mailbox; Using The Missed Calls List - Siemens HiPath 4000 Operating Instructions Manual

OUTPUT
DELETE
NEXT
CANCEL
QUERY NO.
DIALING
DELETE
NEXT
PREVIOUS

Using the mailbox

If you set up fixed call forwarding to the mailbox, you can then play
back and delete incoming messages. Please proceed as shown in the
overview on page 37 and follow the prompts to open the mailbox.
You can choose one of the following functions if there is a voice mes-
sage in the mailbox:
Play back message.
Delete message.
Check other messages.
Cancel.

Using the missed calls list

The caller's phone number is saved if you do not answer a call. The
CLIP function must be enabled for this. You can query the phone num-
bers stored in the mobile telephone and subsequently dial or delete
these numbers.
Depending on the telephone system setting, the last or first five calls
are saved in the missed calls list. The "oldest" call is automatically de-
leted by subsequent calls if the last five calls are stored. You must de-
lete calls individually if the first five calls are saved.
Please proceed as shown in the overview and follow the prompts to
perform the function.
A tick after an entry in the missed calls list indicates that you have al-
ready called this number back.
You can select one of the following functions once you have selected
an entry and opened the supplementary menu:
Dial a phone number.
Delete a phone number.
Display the next entry.
Display the previous entry.
41