Cancelling The Fixed Call Forwarding Destination; Deactivating Call Forwarding For A Line - Siemens Hicom 300 E User Manual

Making multiline and team calls
Step by Step
Line
Service Menu
Line
Call forwarding
Service Menu
Switch es?
Call forwarding?
Deactivate?
80 80 80 80
Cancelling the fixed call forwarding
destination
Precondition: The telephone is in the idle state. A fixed
forwarding destination has been saved (Æ page 79).
Only if it is not your primary line:
Press the line key for the required line.
Press the key. The lamp lights up .
The settings for fixed forwarding for every line are iden-
tical with the call forwarding function described above.
Therefore, for all fur ther steps see Æ page 56.

Deactivating call forwarding for a line

Precondition: The telephone is in the id le state. After a
line key has been pressed, an activated call forwarding
function is indicated on the display.
Only if it is not your primary line:
Press the line key for the required line.
With the call forwarding key:
Press the key. The lamp goes out.
Via the Service Menu:
Press the key. The lamp lights up .
;>
Enter the service code.
or
Select and confirm.
Select and confirm.
Confirm.
For further information see Æ page 56