Siemens 300 Series User Manual page 121

To forward
internal and
external calls
under all
conditions
To set up
Variable
Forwarding
options on a
display phone
Get a dial tone.
Press the FORWARD key.
Dial the extension or dial 9 and the outside
number, to which you want your calls to be
forwarded. Your primary line key status light
flickers and the FORWARD status light turns
on to indicate that Variable Forwarding is
active for your extension.
Hang up.
Note
For this method of forwarding to work, Fixed
Forwarding must not be active.
Press the PROGRAM key. The PROGRAM
status light turns on. PRESS FEATURE KEY
OR DIAL CODE is displayed.
Press the FORWARD key. If your extension
has been set up for Variable Forwarding, the
first Variable Forwarding option is displayed,
as shown under the following step.
Note
On CBX Release 9006.1 only, SYSTEM FORWARD
is displayed if Fixed Forwarding has been set up for
your extension. It is followed by either ON or OFF,
depending on whether Fixed Forwarding is currently
active. If Fixed Forwarding is on and you press the
CLEAR key, Fixed Forwarding is deactivated.
Moving Calls 5–5