Table of Contents
Advertisement
Half Oven Rack (Some Models)
2. Once the stop is reached, grasp the top section and pull straight out until the
second stop is reached. If the top rack will not extend fully, it is not installed
correctly. Reinstall it so that the pan stop is in the back of the oven.
Disassembly (for cleaning)
The two sections of the rack are designed to come apart for easier cleaning.
1. Place rack on flat surface in the closed position top side up.
2. Rotate one side of top rack towards you until it is past the stop (ball).
3. Pull the rack up and out, rotated side first.
Closed Position
Reassembly
CAUTION:
Always verify that top rack is installed correctly after reassembly.
The back edges of the top rack must be under the rack guide on the
bottom rack. DO NOT simply rest the top rack on top of the bottom
one.
1. To reassemble rack, hold top rack diagonally across bottom rack.
2. Insert one side of top rack to closed position.
3. Rotate the other side toward the back of the rack until it passes the stop
(ball).
4. Push top rack the rest of the way in.
Closed Position
Cleaning
Clean rack with hot sudsy water. Dry thoroughly. For stubborn dirt, use a soap
filled steel wool pad. DO NOT clean the rack in the self-cleaning oven.
The half oven rack can be used as a simple flat rack or as a half-sized rack. With
the right half of the rack removed, you can place a tall item (such as a turkey) on
one side of the rack below and a shorter item (such as a casserole) on the other
side. A second shorter item can then be placed on the half rack (above the first
Getting Started
Back of Rack
Stop (Ball)
Front of Rack
Figure 6: Disassembly
Back of Rack
Stop (Ball)
Front of Rack
Figure 7: Reassembly
English 11
Advertisement
Table of Contents
