Table of Contents
Advertisement
If you want to use a cell phone with modem over the serial interface, you
must use a null-modem adaptor between the PC connection cable sup-
plied and the corresponding cell phone data cable. The adaptor is available
as an accessory from your specialized dealer.
The following dialog window appears.
Network Settings
Tap OK . The dialog box Connection Settings appears.
Connection Settings
Tap in the input fields User Name and Password and enter the data which
you received from your Internet service provider. You do not have to fill out
the Domain field. For extra security the field Password only displays aster-
isks when the password is entered.
Check if the telephone number of your provider in the Dial-up Connection
dialog box is correct. If this is not the case, tap Dialing Properties... The
code of the country you are
country code field (e. g. 49 for Germany or 41 for Switzerland). Tap OK .
If you check the Save Password box, you do not need to specify your pass-
word again each time you dial in. However, if you want to prevent other
people from using your SIMpad access, for example, you should leave the
box empty.
Tap OK . You are then asked if you wish to save the settings. Confirm the
query with OK . The settings are saved permanently. A confirmation mes-
sage informs you that the settings have been saved.
in must be specified in the local
Advertisement
Table of Contents
