Changing The Precisor - Siemens ProLINE-RoadRunner ProLINE-RoadRunner Operator's Manual

24

Changing the Precisor

PNP Head Cover
3
ProLINE-RoadRunner Operator's Guide
To change the precisor:
1. Select Job, then End, wait for
the blue lamp to light and turn
the power Off (0).
2. Lift off the Robotics Cover.
3. Starting at one end, pull the
precisor down off the magnet,
and then pull the other end off.
The PNP Head Cover can be
removed for easier access.
Warning:
Pinch Warning. Keep Hands
Away From Moving Parts.