Siemens SITRANS P Brochure & Specs page 207

Selection and Ordering data
1)
Further designs
Please add "-Z" to Order No. and
specify Order code.
Accessory set to EN
(required for flanging, weight 0.2 kg)
7
4x screws / -20 UNF x
16
1
2 / inch to ASME B18.2; chromized
8
steel
2x flat gaskets made of PTFE,
max. permissible 420 bar, 80 °C
7
4x screws / -20 UNF x
16
1
2 / inch to ASME B18.2; chromized
8
steel
2x O-rings to DIN 3771,
20 x 2.65 - S - FPM90, max. permiss-
ble 420 bar, 120 °C
2)
Accessory set to DIN
(required for flanging, weight 0.2 kg)
4x screws M10x55 to DIN EN 24014;
chromized steel
4x washers Ø 10.5 mm to DIN 125;
2x flat gaskets made of PTFE,
max. permissible 420 bar, 80 °C
• Standard design
• Version for oxygen
4x screws M10x55 to DIN EN 24014;
chromized steel
4x washers Ø 10.5 mm to DIN 125;
2x O-rings to DIN 3771,
20 x 2.65 - S - FPM90, max. permiss-
ble 420 bar, 120 °C
Mounting plate
for valve manifold, made of
electrogalvanized sheet-steel
for wall mounting or for securing on
rack (72 mm grid), weight 0.5 kg
Scope of delivery:
1 mounting plate with bolts for
mounting on valve manifold
for pipe mounting, weight 0.7 kg
Scope of delivery:
1x mounting plate M11, 2x pipe
brackets with nuts and washers
(for pipe with max. Ø 60.3 mm)
Valve manifold 100 bar
suitable for oxygen
for 7MF9410-1F
for 7MF9410-3F
1)
When ordering accessory set or mounting together with the valve
manifolds, please use Order code; otherwise use Order No.
2)
Flange connections to DIN 19213 only permissible up to PN 160!
F) Subject to export regulations AL: 9I999, ECCN: N.
© Siemens AG 2008
SITRANS P measuring instruments for pressure
Fitttings - Shut-off valves for differential pressure transmitters
■
Order code Order No.
B31 F) 7MF9010-5CC
B34 7MF9410-5CA
B11 7MF9010-6AD
B15 7MF9010-6AE
B16 7MF9010-6CC
M11 7MF9006-6EA
M12 7MF9006-6GA
S13
S14
3-way and 5-way valve manifolds DN 5
Accessories
Accessory set for 3-way and 5-way valve manifold DN 5 for
flanging
7
• B31: 4 screws / -20 UNF x 2
16
2 flat gaskets
7
• B34: 4 screws / -20 UNF x 2
16
2 O-rings (FPM 90)
• B11: 4 screws M10x55 to DIN EN 24014, 4 washers,
2 flat gaskets
• B15 (suitable for oxygen): 4 screws M10x55 to DIN EN 24014,
4 washers, 2 flat gaskets
• B16: 4 screws M10x55 to DIN EN 24014, 4 washers,
2 O-rings (FPM 90)
Washers Ø 10.5 to DIN 125
Flat gaskets made of PTFE, max. 420 bar, 80 °C
O-ring to DIN 3771, 20 x 2.65 – S – FPM90, max. 420 bar, 120 °C
Note: M10 screws only permissible up to PN 160!
Mounting plate
Made of electrogalvanized sheet-steel
• M11: For wall mounting or for securing on rack (72 mm grid)
Scope of delivery:
- 1 mounting plate 7MF9006-6EA with bolts for mounting on
valve manifold
• M12: For pipe mounting
Scope of delivery:
- 1 mounting plate M11
- 2 pipe brackets with nuts and washers for pipes with max.
Ø 60.3 mm
Valve manifold 100 bar, suitable for oxygen
S12: Only in combination with versions for aggressive liquids
and gases
1
/ inch to ASME B18.2.1,
8
1
/ inch to ASME B18.2.1,
8
Siemens FI 01 · 2009 2/207
2