Table of Contents
Advertisement
9mm
(0.35")
LK3
LK5
LK7
LK8
LK 9
LK 10
RS-485
LOCAL IN OUT
E
-
+
IP+ IP- OP+ OP-
Siemens Building Technologies
Fire Safety & Security Products
4.
Connect the next device in the Fire Override sequence to the FIRE OVER-
RIDE OUTPUT port if required.
5.
Connect the FLN wires (from the ACC) to the RS485 BUS port.
6.
If the FLN cable is long or subject to high noise, ensure that the jumper across
link LK10 (EOL) has been made. This only applies to units located on the
ends of bus lines.
7.
Connect the active (+ve) and neutral (-ve) wires from the Power Supply Unit
(PSU) to the POWER IN port. Ensure the polarity of the connection is made
correctly.
8.
Check all connections thoroughly.
9.
Power can now be applied to the AFI5100 .The following diagram displays the
layout and dimensions of the AFI5100 with brace attached:
287mm (11.30")
257mm (10.12")
DC OUT
DC OUT
0V V+
0V V+
LK14
LK11
LK12
LK13
FOR EN
FOR DIS
RLY1
RLY2
RLY3
RLY4
OUTPUT 2
OUTPUT 1
OUTPUT 4
OUTPUT 3
Nc C No
Nc C No
Nc C No
Nc C No
Input Point Module (AFI5100)
(0.35")
9mm
LK1
LK2
LK4LK6
RLY5
FIRE OUT
POWER IN
Nc C No
0V V+ E
5mm
5mm
(0.20")
250mm
(9.84")
7
02.2005
Hide quick links:
Advertisement
Table of Contents
