Av Sync Setup; Listening To Radio - Siemens HT-Q100 Instruction Manual

AV SYNC Setup

Video may look slower than the audio if it is connected to a digital TV.
If this occurs, adjust the audio delay time to to match the video.
1
Press the MENU button.
•
Setup menu appears.
MOVE ENTER EXIT
Press Cursor , buttons
3
to move to 'AV-SYNC' and
then press ENTER button.
MOVE ENTER RETURN EXIT
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
53
Press Cursor , buttons
2
to move to 'Audio' and then
press ENTER button.
MOVE ENTER EXIT
Press Cursor , buttons
4
to select the AV-SYNC Delay
Time and then press the
ENTER button.
•
You can set the audio delay time between 0 ms
and 300 ms. Set it to the optimal status.
MOVE SELECT RETURN EXIT

Listening to Radio

Remote Control Unit
Press the TUNER
1
button to select the
FM band.
Main Unit
1 Press the Function
button to select the
FM band.
Press MO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
•
Each time the button is pressed, the sound switches between "STEREO" and "MONO".
•
In a poor reception area, select MONO for a clear, interference-free broadcast.
ENG
2
Tune in to the
desired station.
Automatic Tuning 1 When is pressed, a
preset broadcast station is
selected.
Press and hold TUNING/CH to
Automatic Tuning 2
automatically search for active
broadcasting stations.
Manual Tuning Briefly press TUNING/CH to
increase or decrease the
frequency incrementally.
2
Select a broadcast
station.
Press the STOP ( )
Automatic Tuning 1
button to select
PRESET and then press
button to select the preset station.
Press the STOP ( )
Automatic Tuning 2
button to selec "MANUAL"
and then press and hold
button to automatically search the band.
Press STOP ( ) to select
Manual Tuning
MANUAL and then briefly
press to tune in to a lower or
higher frequency.
54