Logging Mobile Units Onto A Telephone System; Activating/Deactivating Mobile Units; Activating/Deactivating Keypad Protection - Siemens Hicom 300E Operating Instructions Manual

Your phone should be logged on and ready to use. If this is not the case then
contact your System Administrator.
Note:
In the case of Hicom cordless E, the mobile units are not logged on to
stations (base stations), but rather to the Hicom 300E telephone
system. In this case,
Activating the mobile unit:
Deactivating the mobile unit:
This allows you to protect your mobile unit against inadvertent key activation,
e.g. when carrying it in your bag. Call are signalled even if keypad protection
is on and can be answered as in the same way as when the telephone is
switched on.
Prerequisite: mobile unit is activated.
Activating keypad protection:
Keyboard
protected
Deactivating keypad protection:
Putting into service
Press the On/Off key - acknowledgement tone is heard.
Press the On/Off key until the display is clear – you hear
the acknowledgement tone.
Press the On/Off key for less than 1 second.
Display when keypad protection is on.
Press the On/Off key for less than 1 second.
always means system.
15