Setting The Date And Time; Determining Direct Call Numbers - Siemens 3000 Operating Instructions Manual

Step-by-Step
D E
Calendar/Clock
D E
Date/Time
F

Setting the date and time

We recommend setting the date and time to ensure the
correct time/date is recorded for all calls. You can
choose between 12-hour display (am, pm) and 24-hour
display.
Note:
Do not switch off the handset after you have
made the settings, otherwise the date and time
will be reset.
Check the date and time and reset from time to time
where applicable.
©
Open the menu.
[
Select and confirm the menu item.
[
Select and confirm the menu item.
o
Enter the date, e. g. 22.09.2002 = 220902.
D
Move the cursor down one line.
o
Enter the time, e. g. 19:05 = 1905.
D
Move the cursor down one line.
G
am Define the display mode (am, pm).
Save Save the settings.

Determining direct call numbers

You must determine a direct call number to perform a
direct call. The room monitor number is used as the di-
rect call number. This number is then selected once you
activate the direct call key (
tor function must be deactivated for this.
Enter the direct call number via the room monitor func-
tion ( page 77).
You can store a direct call number in the redial list by
saving the number separately as "direct call" in your mo-
bile telephone's telephone directory.
Store the direct call number as "direct call" in your mo-
bile telephone's telephone directory (
Setting the handset
page 8). The room moni-
page 31).
23