Installing Combi Control - Toshiba Combi control User Manual

Installing
Combi Control
Combi Control should be mounted on the wall to the right
of your heat pump's indoor unit (see fig. 1), with its IR
transmitter pointing down. This way
the IR beam is reflected from the floor and reaches the heat
pump' s sensor most efficiently.
Other mounting configurations are possible too
as long as IR transmission from the controller
to the pump works.
NB! Thick carpets and dark floors can distort the IR beam.
Make sure the IR beam reaches the pump's sensor by using
the controller's Test function (see page 19).
14
Fig. 1
On the right side of
the indoor unit
Fig. 2
Attached to the right side of
the indoor unit