Philips PH11107-B Quick Installer's Manual page 16

Quick Installer Guide for Philips miniPCI 802.11a/b/g card
(5) The "Peer-to-Peer Channel Net Start" is enabled only if the Network Type is "Ad-
Hoc".
(6) The user can select between different available Transmit rates only if the "Wireless
Mode" is not in "Auto". If the wireless mode is "Auto", this edit box is disabled.
(7) The OK button causes all changes (on all the tabs) to be saved. Configuration changes
for all profiles (not just the selected one) will be saved. If any changes have been made
to the active profile, or if a new active profile is selected, then the 802.11a/b/g driver
will be unloaded and reloaded. Upon reload, the new settings will take effect. This
button is active from any screen in the control panel application.
(8) The Cancel button will back out any and all changes made during this invocation of the
control panel application. This includes any change made to any profile on any screen.
This button is active from any screen in the control panel application.
4. Configuration Screen Input Validation
An error message is displayed, and the user is prevented from leaving the Configuration
screen (except via Cancel button) under the following conditions:
(1) The Network Type is "Adhoc" and the Network Name1 field is blank.
- 16 -