LG STB-3000 Owner's Manual page 5

Hide thumbs Also See for STB-3000:
Table of Contents

Advertisement

If you dropped the product or the case is broken, turn off the product and
y
unplug the power cord.
- If you continue to use without taking proper measures, electrical shock or
-
fire can occur. Contact the service center.
Do not drop metallic objects such as coins, hair pins, chopsticks or wire into
y
the product, or inflammable objects such as paper and matches. Children
must pay particular attention.
- Electrical shock, fire or injury can occur. If a foreign object is dropped into
-
the product, unplug the power cord and contact the service centre.
Install the product where no radio wave occurs.
y
Make sure to connect Mains cable to compliant AC mains socket with
y
Grounded earth pin. (Except for devices which are not grounded on earth.)
Otherwise possibility you may be electrocuted or injured.
Insert power cable plug completely into wall socket otherwise if not secured
y
completely into socket, fire ignition may break out.
Do not touch the power plug with wet hands. Additionally, if the cord pin is
y
wet or covered with dust, dry the power plug completely or wipe dust off.
You may be electrocuted due to excess moisture.
If you don't intend to use the product for a long time, unplug the power
y
cable from the product.
- Covering dust can cause a fire, or insulation deterioration can cause
-
electric leakage, electric shock or fire.
Never touch this product or antenna during a thunder or lighting storm.
y
- You may be electrocuted.
-
Do not insert any metal objects/conductors (like a metal chopstick / cutlery
y
/ screwdriver) between power cable plug and input Wall Socket while it is
connected to the input terminal on the wall. Additionally, do not touch the
power cable right after plugging into the wall input terminal. You may be
electrocuted.
DISCONNECTING DEVICE FROM MAINS
y
- Mains plug is the disconnecting device. The plug must remain readily operable.
-
Make sure to turn off the product. Make sure to remove all cables before
y
moving the product.
- You may be electrocuted or the product can be damaged.
-
SAFETY INSTRUCTIONS
5

Advertisement

Table of Contents
loading

Table of Contents