Table of Contents
Advertisement
DHCP is enabled for the network. If DHCP is not enabled, this field is the IP address. If
DHCP is enabled, this field will only provide the IP address if no DHCP server
responds with an IP address for the Access Point.
LG's Access Point has a default IP address - 100.100.100.100 . It is highly
recommended that you change the IP address from the default only if you do not use
DHCP server. You should not use the default IP address except for the first Access
Point setup.
• SSID: The SSID is the network name for your Access Point. All Access Points on the
same LAN must be set with the same SSID in order to support inter-cell roaming.
If the Access Point is configured to communicate with wireless clients and the Secure
Access parameter is enabled, each client must be configured with the same SSID. If
Secure Access is not enabled, clients can be configured with the A ccess Point's
wireless network name, ANY (all uppercase), or keep the Wireless Network Name field
blank.
• Default Channel: The channel sets the center frequency of the Access Point. In a
LAN-to-LAN configuration, the Access Points need to be set to the same channel. In a
wireless client configuration with multiple Access Points, adjacent Access Points
should be set to different channels that are at least 5 channels apart recommended.
For example, in a configuration with 3 A ccess Points, set the channels to 1, 6, and 11.
Note that some countries only support a limited number of channels. Refer to the
Appendix Channel section . The Access Point does not allow you to set channels
outside your country's band.
Wireless clients with LG PC/PCI Cards automatically switch to the Access Point's
channel when roaming between Access Points in a wireless network.
• Slave Mac Address: When the Access Point functions as a wireless LAN bridge
master, it can define the slave bridge's MAC address.
• Ethernet Mac Address: The Media Access Control (MAC) address is a unique serial
number assigned to a device by the LG Electronics.
• WEP: WEP stands for Wired Equivalent Privacy. WEP is an encryption scheme that
Page 34 of 50
Advertisement
Table of Contents
