Watching The Dvd; Preparation; Turning On The Power; Select The Dvd Mode - Sharp Aquos LC 20DV20U Operation Manual

Watching the DVD

Simple operations for watching a DVD.
POWER
TV/DVD status indicator (POWER)
ON
OFF/Standby
POWER (On/Standby)
POWER indicator
Lighting (Green)
Lighting (Red)
TV/DVD

Preparation

Perform the following steps before you press POWER
on the remote control unit.
1. Insert the batteries into the remote control unit.
(See page 8.)
2. Connect the antenna cable to the TV/DVD. (See
page 12.)
3. Plug in the AC cord to the AC outlet. (See page
7.)

Turning on the power

Press POWER on the TV/DVD, or POWER on the
remote control.
• POWER indicator (Green): The TV/DVD is on.

Select the DVD mode

Press TV/DVD to select the DVD mode.

Turning off the power

Press POWER on the TV/DVD, or POWER on the
remote control.
• The TV/DVD enters standby mode and the image on the
screen disappears.
• The POWER indicator on the TV/DVD changes to Red.
NOTE
• If you are not going to use this TV/DVD for a long period
of time, be sure to remove the AC cord from the power
outlet.
• Weak electric power is still consumed even when
POWER is turned off.
• If a station being viewed stops broadcasting, the TV/DVD
will automatically shut itself off after 15 minutes. (TV
mode only.)
29