Commissioning With Nokia Metrohub Manager; Configuring Identifications And Settings - Nokia MetroHopper User Manual

2.3

Commissioning with Nokia MetroHub Manager

Nokia MetroHub Manager contains Commissioning Wizard, which facilitates the
commissioning process. Commissioning Wizard will first ask you to accept the
selected site configuration file (
In case radio link equipment is installed, you can monitor the radio hops in the
Check and Fine-tune Hops page. The Commissioning Wizard will
automatically draw a commissioning report which is displayed on the last page of
the wizard sequence.
In case you will later install new radios, you can commission the equipment by
launching the Radio Wizard from the FXC RRI menu. The procedure is exactly
the same as described in the previous section.
Note
FC RRI is not compatible with Nokia MetroHub.
2.4

Configuring identifications and settings

This section describes how to view or change outdoor unit related identifications
or settings with Nokia BTS Manager or Nokia MetroHub Manager. When you are
using Nokia BTS Manager, all Nokia MetroHopper related identifications and
settings are accessed through the Transmission menu. In case you are using
Nokia MetroHub Manager, these are found under the FXC RRI menu.
Note
For simplicity, both the Transmission menu of Nokia BTS Manager and the FXC
RRI menu of Nokia MetroHub Manager are henceforth referred to as
Transmission / FXC RRI.
DN99611394 © Nokia Networks Oy
Issue 2-0 en
Click Report to see a more detailed commissioning report for each outdoor
unit. The commissioning report contains, for example, the measured
interference level of the selected channel, and the fading margin
measurement.
Click Next to return to the Nokia BTS Manager Commissioning Wizard.
Commissioning Nokia MetroHopper
) and to send the node settings to the node.
.SDF
13 (42)