Sharp DV-L70BL Operation Manual page 42

To turn power on and off with the remote control unit
When the main power switch is in the "ON" position, you can turn power off
and on by pressing OPERATE.
BACKLIGHT VIEW VIDEO
OPERATE
HI/LOW/OFF MODE ADJUST
DIGITAL DIGITAL
VIRTUAL
GAMMA S.PICTURE
TITLE ENTER
MENU RETURN
SKIP PLAY SKIP
RESUME STOP STILL/PAUSE
DISPLAY REV FWD SLOW
REPEAT
PROGRAM
CLEAR MEMORY
DIRECT
1
Press OPERATE.
• Each press of OPERATE toggles power on and off.
• Pressing OPERATE does not turn on power if the main power switch is
in the "OFF" position.
• After DVD player power is turned off using OPERATE, the power/
standby lamp is red to indicate the DVD player is in the Standby mode.
Standby mode
In the Standby mode, the power/standby lamp is red, regardless of whether
the display panel is open or closed. The DVD player goes into the Standby
mode when either of the following happens.
• When you press OPERATE
• When disc play is stopped for about five minutes in the DVD mode
To restore full power from the Standby mode, press RETURN on the player,
slide the main power switch to the "OFF" position and then back to "ON" again,
or press OPERATE.
OPERATE
Power/standby lamp
Turning Power On and Off
RETURN
39
GB