Data Transmission Between Master Pc And Slave Pc - Sharp JW-21MN User Manual

[3] Data transmission between master PC and slave PC

Providing synchronous transfer gives positive data communication.
[An example of synchronized transfer by OUT instruction]
Master station (PC00)
コ０２００
コ０２０３
Program in master station
F-44
00000
02000
- 00000 is turned "ON" at the master station side.(OUT 02000 is a self-holding circuit.)
- When 02000 is turned "ON" at the slave station side, OUT 02030 is also turned "ON." This is sent
back to the master station side.
： Send : Receive
02030 ０２０００
02000
9-5
Slave station (PC01)
コ０２００
コ０２０３
Program in slave station
02000 02030
9