Post Error Messages - NEC Express5800/T120h User Manual

Chapter 3 Setup
3. After a while, the following message is displayed on the screen. (The on-screen message depends
on your environment.)
By pressing the function key following messages, you can call the functions below upon completion of
POST.
<F9> key:
<F10> key:
<F11> key:
<F12> key:
Regarding designated utilities, see instruction documents attached to each option board.
Necessary key inputs are different depending on option boards installed, so you are requested to
operate according to messages.
4. The OS starts when POST is completed.

POST error messages

Error message appears on screen if POST detects an error. For details, see Chapter 3 (1. IML Error Message)
in "Maintenance Guide".
Start System Utility. See Chapter 3 (2 System Utility).
Run EXPRESSBUILDER. For details, see Chapter 3 (4. EXPRESSBUILDER and
Starter Pack).
Start Boot Menu. See Chapter 3 (2 System Utility).
Boot from network.
 When no bootable device is connected, the following message is
Tips
displayed by terminating POST.
‑
No bootable devices were detected
‑
Please attach a UEFI bootable device.
‑
System will automatically retry the UEFI Boot Order in x seconds.
Write down the error message before calling your sales representative.
Note
Error messages are useful information for maintenance.
Express5800/T120h User's Guide
1. Turning on the Server
181