Error Indicators And Warnings - Sharp DX-AT50 Operation Manual

Error indicators and warnings

When you load an unplayable disc or fail to perform operations properly, the following
messages are displayed on the AV control unit, the DVD player and the TV screen.
AV control unit display
! Place the system away from noise source or plug the
AC power cords to other AC outlets. (*)
! The speaker is not connected properly.
! The amplifier is defective.
Set the system to the stand-by mode and turn the
power on again. (*)
! The amplifier is defective.
Set the system to the stand-by mode and turn the
power on again. (*)
! The subwoofer/amplifier is defective.
! Place the system away from noise source or plug the
AC power cords to other AC outlets. (*)
! The cooling fan on the back of the subwoofer/ampli-
fier does not run due to foreign objects caught in it.
Is the system unplugged?
! The digital audio input jack is not connected proper-
ly.
! Unspecified signal is received and cannot be recog-
nized.
! The system connection cable is unplugged.
! The temperature is too high.
Set the system to the stand-by mode and wait for a
while.
(*): Should the same message appear even if the DVD player and the subwoofer/am-
plifier unit are unplugged and plugged in or are set to the stand-by mode and on
again, contact your local dealer where you purchased the subwoofer/amplifier unit.
Meaning
" Condensation
Sudden temperature changes, storage or operation in an extremely humid environ-
ment may cause condensation inside the cabinet (laser pickup, etc.) or on the trans-
mitter on the remote control.
Condensation can cause the system to malfunction. If this happens, leave the power
on with no disc in the DVD player until normal playback is possible (about 1 hour).
Wipe off any condensation on the transmitter with a soft cloth before operating the
system.
DVD player display
! The disc is not loaded.
! The disc is scratched or dirty and cannot be recog-
nized.
! The disc is loaded upside down.
TV screen
The disc cannot be played with this system or
the disc is loaded in an incorrect way.
Disc Error:
Playback feature may not be available
on this Disc.
Please eject the disc.
The region number of the DVD is not "1" or
"ALL".
Region Error:
Playback is not authorized in your region.
Please eject the disc.
The disc does not support the operation de-
scribed in this operation manual.
1 5 / C
8 3 / 0
0 1 : 2 3 4 0 :
ENGLISH
Meaning
Meaning
E-48
SD-AT50
DX-AT50