Sharp UX-CD600 Operation Manual page 57

Paging a cordless handset from the machine
(cordless handset locator)
You can use this procedure to page a cordless handset, or locate a handset in
the event that you misplace it.
1
Pick up the machine handset.
•
If you wish to use the speakerphone, skip this step (the speaker will
activate automatically in Step 2 below).
INTERCOM/
2 CONFERENCE
Press
enter the number of the cordless
handset that you wish to page.
Example:
3
The selected cordless handset rings.
•
This allows you to locate the cordless
handset if you have misplaced it.
4
The other person presses any key (except
handset to answer.
5
Talk with the other person (if you use the speakerphone, speak toward
"MIC" on the operation panel). When you are ready to end the
conversation, replace the handset or press
If a call comes in while the Intercom feature is being used
If an outside call comes in while you are using the Intercom feature, the
person who wishes to take the call should first stop the Intercom call (press
on the cordless handset or replace the machine handset), and then
OFF
OFF
answer the outside call (press any key except
or pick up the machine handset).
on the machine, and
Using the Intercom Feature
Machine display:
INTERCOM
3: SUE
Display of selected
cordless handset:
INTERCOM
0: BASE STATION
) on the cordless
OFF
OFF
SPEAKER
as appropriate.
on the cordless handset
OFF
OFF
55