Siemens SIMATIC HMI series Operating Instructions Manual page 112

Technical information
7.5 Technical specifications
Climatic ambient conditions
The following table shows the climatic ambient conditions for operation of the device.
Ambient conditions
Temperature built-in units:
•
•
Temperature PRO devices:
•
•
Relative humidity
Atmospheric pressure,
operation elevation
Pollutant concentration
IFP1900 and IFP2200: 0 ... 45 °C
1
Built-in units: No condensation on the rear of the device,
2
PRO devices: No condensation inside the housing
Note the information in section "Notes about usage (Page 31)" and the information on the
mounting positions:
● Permitted mounting positions of the built-in units (Page 38)
● Permitted mounting positions of the PRO devices (Page 44)
112
Vertical mounting
Mounting at an angle
Vertical mounting
Inclined mounting
Permitted range
0 ... 50 °C (landscape format)
0 ... 40 °C (portrait format)
0 ... 40 °C (landscape format)
0 ... 35 °C (portrait format)
0 ... 45 °C (landscape format)
0 ... 45 °C (landscape format)
10 ... 90%, no condensation
1140 to 795 hPa
SO : < 0.5 vpm;
2
Relative humidity < 60%, no condensation
H S: < 0.1 vpm;
2
Relative humidity < 60%, no condensation
Comments
1
Slope angle max. 35°
Tilt angle max. 45°
2
Corresponds to an
elevation
of -1000 to 2000 m
Test: 10 cm
10 days
2
Test: 1 cm
10 days
2
IFP, IFP PRO, IFP ETH
Operating Instructions, 11/2017, A5E31298376-AH
/m ;
3 3
/m ;
3 3