How To Utilize This Installation Procedure; Illustrations Used In This Procedure; Descriptions Used In This Procedure; When Using The Contained Parts (Bundled Components In The Shipping Carton) - Canon D1 Service Manual

How to Utilize This Installation Procedure

Illustrations Used in This Procedure

Illustrations used in this procedure are those of Color Image Reader Unit-D1 unless otherwise
specified.

Descriptions Used in This Procedure

• In this procedure, Color Image Reader Unit-D1 and Color Image Reader Unit-D2 are
inclusively called the reader unit.
• For the procedure required only for the Color Image Reader Unit-D1, the relevant section
caption is followed by "[D1 only]".
When Using the Contained Parts (Bundled Components
in the Shipping Carton)
After unpacking, confirm the parts contained in the package by referring to the illustration
of "Bundled Components" described in this procedure. The below symbol appears on the
illustration of some steps when the parts contained in the shipping carton are to be used.
Mind this symbol to be aware the parts contained in the shipping carton are to be used.
6
Installation > How to Utilize This Installation Procedure > Symbols in the Illustration
F-6-1
6 Installation > How to Utilize This Installation Procedure > Symbols in the Illustration

Symbols in the Illustration

The frequently-performed operations/works are described with symbols in this procedure.
Check the description below.
Screw Connector
Tighten Remove Connect
Prohibition Checking
(Good/Bad) instruction
Good Bad Check
Ins t ruction on direction
(front/rear, top/bottom)
Push Connect to Turn ON
the outlet the switch
Remove the F i t in the Release/
projection projection remove
the claw
Harness
Disconnect Connect/ Disconnect/
Secure Free
Visual Sound
check check
Copy
Fit in/attach
the claw
F-6-2
6-2
6-2