LG GT-8110C User Manual page 20

LG Information & Communications, Ltd.
4. Turn the mounting bracket around
so that the larger part the wedge is
set the bottom of the phone.
5. Use the same method to replace the
bracket.
6. Insert the 8 inch line cord into phone
jack marked TEL LINE.
7. Thread the line cord through the channel
on the right-hand side of the bracket to
secure the cord.
8. Plug the adapter tip into the adapter jack.
Be sure that the tip is all the way into the
jack.
9. Thread the adapter cord through the
channel on the left-hand side of the
bracket.
10. Insert the other end of the line cord into the wall jack.
11. Align the holes in the bracket over the wall-plate posts.
12. Slide the phone down until the phone is secure.
STEP 3. PLUG IN THE ADAPTER
Plug the adapter into an electrical outlet. Without AC power, your phone does not operate.
STEP 4. ADD THE BATTERY TO THE HANDSET
Use this procedure to install or to replace a "dead" battery.
Report # EUT User manual.doc FCC Part 15 Subpart C Test Report
Page 20 of 32
FCC ID: FFMGT8110C