Philips CM-150 CA Manual page 18

5. Click Discover. CK Firmware Updater automatically discovers all CM-150 CA
devices connected to your lighting network.
6. Select a CM-150 CA device and click PROGRAM.
7. Repeat step 6 for each CM-150 CA device that you want to update.
Recovering from Firmware Update Errors
In rare instances, you may experience power or data loss or interruption during
the firmware update process. In such cases, a CM-150 CA device may receive an
incomplete or corrupt firmware image. You must successfully re-install the firmware
image to restore normal CM-150 CA operations.
• In the case of power loss or interruption, the CM-150 CA device retains its
assigned IP address, but you are temporarily unable to communicate with the
device using that address.
If this happens, enter the reserved IP address 10.1.250.250 in CK Firmware
Updater, and re-install the firmware image.
Once the firmware image is successfully installed, you can again communicate with
the CM-150 CA device using its assigned IP address.
• In the case of data loss or interruption, you must manually enter the device IP
address in CK Firmware Updater to re-install the firmware image.
If you don't know the assigned IP address, you can cycle power, then use the
reserved IP address 10.1.250.250, as described above.
18
CM-150 CA Product Guide