Notational Conventions; Installing An Ergonomic Video Workstation - Siemens Mobile 750 Operating Manual

Introduction

Notational conventions

The meanings of the symbols and fonts used in this manual are as follows:
Pay particular attention to texts marked with this symbol. Failure to observe this warning
!
endangers your life, destroys the notebook, or may lead to loss of data.
i
This symbol is followed by supplementary information, remarks and tips.
²
Texts which follow this symbol describe activities that must be performed in the order shown.
Texts in this typeface are screen outputs from the PC.
Texts in italics indicate commands or menu item.

Installing an ergonomic video workstation

Before you set up your equipment you should select a suitable position for working at the monitor.
Please observe the following advices when installing a video workstation.
Avoid direct and reflected glare.
preferable viewing sector
0°
60°
permissible
viewing sector
Position the monitor for optimum viewing. The
viewing distance to the monitor should be
approximately 50 cm.
2
Avoid glare from electric lighting.
65°
30°
30°
65°
permissible viewing sector
edge of desk
Position the keyboard where it is
easiest to reach.
approx. 90°
and
more
Remember to maintain correct posture.
Notational conventions
permissible permissible
reaching sector reaching sector
600 mm 600 mm
approx. 90°
A26391-K84-Z100-1-7619