7368 ISAM CPE A-020W-A Product Guide
3.2.5
The A-020W-A CPE equipment complies with the following EN 300 019 European
environmental standards:
•
•
•
3.2.6
The A-020W-A CPE equipment complies with the requirements of ITU
Recommendation K.21 for resistibility of telecommunication equipment installed in
customer premises to over voltage and overcurrents.
3.3 Electrical safety guidelines
This section provides the electrical safety guidelines for the A-020W-A CPE
equipment.
3.3.1
The use of any non-Nokia approved power supplies or power adapters is not
supported or endorsed by Nokia. Such use will void any warranty or support contract
with Nokia. Such use greatly increases the danger of damage to equipment or
property.
3.3.2
The following are the guidelines regarding cables used for the A-020W-A CPE
equipment:
•
Issue: 01
Release 05.08.01 | June 2018 | Edition 01
Environmental standard compliance
ETS 300 019-2-1 Storage Class T1.1
ETS 300 019-2-2 Transport Class T2.3
ETS 300 019-2-3 Stationary Class T3.1E
Resistibility requirements compliance
The devices comply with BS EN 61140.
Note —
Power supplies
Cabling
All cables must be approved by the relevant national electrical code.
3FE-47511-AAAA-TCZZA
ETSI safety guidelines
19