Yamaha PW-SE Original Instructions Manual page 19

Battery capacity indicator
Function display
2 Battery capacity indicator
The battery capacity indicator displays an estimate of how
much capacity is left in the battery.
2 Function display
The function display can display the following functions.
• Odometer
• Trip meter
• Range (Remaining assist distance)
Push the assist mode switch (down) for 1 second or longer,
the display changes as follows:
Odometer → Trip meter → Range → Odometer
You can reset the data for trip meter.
7 Odometer
This displays the total distance (in kilometers or miles) rid-
den while the power was on.
The odometer cannot be reset.
7 Trip meter
This displays the total riding distance (in kilometers or
miles) since it was last reset.
When you turn off the power, the data up to that point will
remain in the display.
To reset the trip meter and begin counting a new total,
press the assist mode switch (up) and assist mode switch
(down) simultaneously for 2 seconds or longer when the
trip meter is displayed.
7 Range (Remaining assist distance)
This displays an estimate of the distance (in kilometers or
miles) that can be ridden with assist on the residual bat-
tery capacity of the battery installed. If you switch the as-
sist mode when the remaining assist distance is displayed,
the estimate of the distance that can be ridden with assist
changes.
The remaining assist distance estimate cannot be reset.
TIP
• The remaining assist distance changes depending on
the riding situation (hills, headwind, etc.) and as the
battery runs down.
• If in Off mode, "- - - -" is displayed.
13
19