Table of Contents
Advertisement
2. General information
The manual is a part of the series and the versions as mentioned on the title
page. The manual describes the safe and proper use in all modes of opera-
tion.
The type label indicates the series and size, the most important operating
data and the order number. The factory number/serial number describes the
identifies the system uniquely and serves this purpose for all further busi-
ness transactions.
In order to maintain the warranty, in the event of damage immediately
contact the nearest Honeywell service centre.
2.1 Conformity with the following norms
Pump unit: Machinery Directive 2006/42/EG
Pump unit: EMC Directive 2004/108/EG
Frequency inverter: EMC Directive 2004/108/EG
Frequency inverter: Low voltage directive 2006/95/EG
2.2 Warranty and liability
As a matter of principle, the general sales and delivery terms of the Honey-
well Company apply. Warranty and liability claims for injury to persons and
damage to property are ruled out if they arise from one or more of the follo-
wing causes.
• Non-intended use of the compact booster unit
• Improper assembly, start-up, operation and maintenance of the compact
booster unit
• Failure to comply with the instructions in the manual concerning transport,
storage, assembly, start-up, operation, maintenance, and service of the
compact booster unit
• Unauthorised constructional modifications of the compact booster unit
• Improperly performed repairs
• Catastrophes through effect of a foreign object or force majeure
2.3 Storage and perfect condition
This instruction manual is a part of the compact booster unit and has to be
complete and accessible at all times. Any instruction or page that is missing
has to be replaced immediately.
2.4 Illustrations
The illustrations used are examples of one possible version of the compact
booster unit and might differ in individual cases from the actual compact
booster unit version.
Honeywell GmbH
GB
2.5 Symbols
1. Start of a task description
2. Next work step
- Result of an action
• List of several options
Reference to other documents
Pictogram
Danger classification
Danger source
Consequence of non-compliance
Avoidance
2.6 Other applicable documents
Operating manuals, circuit diagram and further documentation of auxilia-
ry equipment and integrated machine parts
Product data sheet CBU140
Operating instructions of the operating company
Data sheets
Declaration of Conformity
2.7 Glossary
EN 1717
European standard that specifies technical regulations for potable water
installations.
Noise expectancy values
The expected noise emission, stated here as sound pressure level (SPL) in
dB(A).
Certificate of no objection
A certificate of no objection is a declaration that the system has been
cleaned properly so that parts that have been in contact with medium are not
dangerous for health and environment.
6
Translation of original - EN1H-1377GE23 R1114
Advertisement
Table of Contents
