Making Calls - Sony D-WAVE Zuma CM Z200 Operating Instructions Manual

Making calls

You can call any number up to 32 digits from within a
service area. The out-of-service icon ( ) indicates that
you are outside the service area.
1
Use the number buttons to enter the number.
If you enter the wrong digit, press
digits, press
END
2
If the arm microphone is closed, open it to dial. If the arm
microphone is open, press
The phone dials the number you have entered. The
When the call is connected, the call timer appears and displays the elapsed
time.
3
Press or close the arm microphone to end the call when you are
END
finished.
The icon disappears and the final elapsed call time flashes for 10 seconds.
The standby display automatically reappears.
Tips
• When dialing, you can insert a pause to attach a DTMF (Dual Tone Multiple Frequency)
number to the number you are calling (see page XX).
• If Auto-Hyphen is turned on, the phone number is hyphenated automatically as you
enter the digits (see page XX).
• If Minute Alert is turned on, a beep sounds at intervals (based on the setting you select)
throughout the call (see page XX).
To adjust the earpiece volume during a call
To increase the volume, turn
Turn down to decrease the volume.
–
Tip
In addition, you can adjust the volume using the Volume menu (see page XX).
To mute/unmute the microphone during a call
Push and hold .
Tip
In addition, you can mute the microphone using the Volume menu (see page XX).
To redial the last number
On the standby display, press
you dialed last is redialed automatically.
3.2
3_CM_Z200
to back up. To clear all entered
CLR
or hold down to return to the standby display.
CLR
to dial.
SEND
+
up.
when the arm microphone is open. The number
SEND
2
Arm mic
CLR
SEND
0 9
WX
-
OPER
YZ
/
END
icon appears.
6/8/98, 9:27 AM