500ML Lighting Control Console
QuickStart Guide
Showfile Name Field
Figure 9: Touchscreen Keyboard & Showfile Name Field
Loading an Existing Show
To be able to open a show, you first need to close any open shows. Do this by pressing [SETUP] and hitting the Close
Show button on the Setup Toolbar. As soon as all shows are closed, the console will return to the Welcome Screen as
shown in
Figure 8 on page
12.
After selecting the show file name from the drop down menu (refer to
Figure 8 on page
12) a, hit the Open button
the console's 8-inch TFT touchscreen display.
Note: Shows stored on a USB Key need to be imported into the console memory before they can be opened.
Importing Shows from a USB Key
From the Welcome Screen hit the Settings button as shown in
Figure 7 on page
11. Or, you can open the Setup Dialog
by selecting the [SETUP] key on the front panel instead.
Once the Setup Menu is shown, switch to the USB tab and hit the Show Import button as illustrated in
Figure
10.
Figure 10: Setup Menu - USB Tab - Show Import
13
To Create or Load a Show