Chapter 2 - Wireless System Operation; Change The 8680I's Bluetooth Pin Code; Minimize Bluetooth/Ism Band Network Activity - Honeywell 8680i User Manual

CHAPTER
WIRELESS SYSTEM OPERATION
2
The following information describes wireless settings. For information about con-
necting to a wireless or Bluetooth network, see
beginning on page 12.

Change the 8680i's Bluetooth PIN Code

Some devices require a PIN code as part of the Bluetooth security features. The
8680i default PIN is 1234, which you may need to enter the first time you connect
to your host. When using multiple 8680is, you may want to change the PIN so each
8680i is uniquely identified. The PIN code must be between 1 and 16 characters.
To change the PIN for the 8680i, scan the bar code below and then scan the appro-
priate numeric bar codes from the
Scan Save to save your selection.

Minimize Bluetooth/ISM Band Network Activity

The settings described below can help you customize the relinking behavior of your
wireless system to obtain the best compromise between convenience and low
interference.
Note: ISM band refers to the 2.4 to 2.48 GHz frequency band used by wireless networks,
cordless phones, and Bluetooth.
8680i User Guide
Connect the 8680i to Your Network,
Programming Chart, beginning on page 235.
Bluetooth PIN
23