Help screens
Help with selection of parameter RP, for example.
Parameters
Parameter
PL
RP
SC
Machining
position
F
HMI sl Turning
Operating Manual, 01/2008, 6FC5398-7AP10-0BA0
2.
Press the "Open" softkey or the "INPUT" key to edit the part program
in the editor.
3.
Press the "Drilling" softkey.
4.
Press the "Drilling Reaming" softkey.
5.
Press the "Reaming" softkey.
The "Reaming" input window opens.
Description
Machining plane:
1)
G17 (XY)
Retraction plane (abs)
Safety clearance (inc)
Single position
•
Drill hole at programmed position.
Position pattern
•
Position with MCALL
Feedrate
Programming a cycle
4.4 Drilling
Unit
mm/min
157