Entering a latitude/longitude pair is easy.
1. Use the
button to change the hemisphere.
The left field contains the latitude. It starts with an
'N' (North) or 'S' (South) letter.
2. Enter numbers for the latitude.
3. Use the decimal point if the degrees, minutes or
seconds are not integers.
4. Use the
,
current cursor position inside the latitude) to start
entering minutes after degrees or seconds after
minutes.
5. When finished, tap the
enter it as you did latitude.
The right field contains the longitude. It starts with
an 'E' (East) or 'W' (West) letter.
6. Once you have entered both numbers, press Done"
to make the selection.
Search for a location
button (the label depends on the
buttonon the right, and
41