Table of Contents
Advertisement
Chapter 2) 7XG3124 Application Guide
Clicking on the Subnet will reveal the IP Start address, Subnet mask and standard gateway settings.
Figure 27: System Configurator - IP Address
We can set the IP start address for our network for convenience, in this case 192.168.0.1. The Standard
Gateway may also be set at this point if one exists.
Figure 28: System Configurator - IP Address 1
©2014 Siemens Protection Devices Limited
Chapter 2 Page 25 of 42
Advertisement
Chapters
Table of Contents
Troubleshooting
