Chapter 2 Preparations
1.10.4 Installing FBU for N8103-179
Follow the steps below to install FBU.
1. See steps 1 to 6 in Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2. Remove the two screws, then
remove the PCI riser card.
3. Remove the battery tray for RAID
controller.
4. Turn the battery tray for RAID
controller the other way, and mount
the FBU.
5. Mount the battery tray for RAID
controller.
6. Connect the FBU control cable (750
mm) that comes with RAID
controller, to the FBU.
7. Connect the FBU control cable (750
mm) and Mini SAS cable to RAID
controller. Align the black marking on
connector of FBU control cable with
that on connector of RAID controller.
Express5800/R120f-1E User's Guide
1. Installing Internal Options
73