Calling Your System Operator; Barge-In On An Extension - Samsung iDCS500 User Manual

Samsung iDCS500

CALLING YOUR SYSTEM OPERATOR

§
Dial the appropriate system code to call your system operator or group of
operators. This is normally 0 or 9.
§
If you want to call a specific operator, dial that person's extension num-
ber.
Note: If the Hot Keypad feature has been turned off, you must first lift the handset
or press the Speaker key before you begin dialling.

BARGE-IN ON AN EXTENSION

The Barge-In feature allows you to barge in on a conversation currently in
progress at another extension. Barge-in is an optional feature and your key-
set must be programmed to allow it to access this feature. See your system
administrator if you require this.
If you dial an extension which is busy, press the BARGE key—or the Scroll
key and then the BARGE-IN soft key—to barge in on the conversation.
Note: You can only barge in on extensions that are programmed to permit barge
in. Otherwise, you will receive a 'barge-in failed/not allowed' message.
iDCS Keyset User Guide
– 16 –