Samsung Version 1.1 Owner's Manual page 81

Type "1" and go to IP auto-regist server address" to type registered Web Server address.
The example below is the IP Address such as 168.219.44,137 or registered host name
such as www.samsung.co.kr.
[ WEB Transmitter ( SNS-110 ) Version 1.1 ]
Boot parameters modification menu
--------------------------------------------
[i]. Ip address modify
.
.
.
.
[q]. Quit menu
--------------------------------------------
Select items? [ ] 1
IP auto-regist server? 168.219.44.147
Type "2" and go to IP auto-regist cgi format to type the cgi program path to transmit or
the name of name of the program path, or the transfer factor.
[ WEB Transmitter ( SNS-110 ) Version 1.1 ]
Boot parameters modification menu
--------------------------------------------
[i]. Ip address modify
.
.
.
.
[q]. Quit menu
--------------------------------------------
Select items? [ ] 2
IP auto-regist cgi? [/cgi-bin/webtx.cgi?regist=%e&host=%i] /cgi-bin/webtx.cgi?regist=%f&host=%i
Cgi format to type here are as follows.
[CGI path] : It is the path of the directory which CGI program is located and it
has to start with the root symbol (/).
The example above is /cgi-bin/.
[CGI program] : It is one of the names of CGI program which server provides.
The example above is webtx.cgi.
[Format string] : It is the value that is transmitted as factor to the CGI program.
If you use the following values starting with %, you can send
the SNS-110 network information.
%e : The last three digits of Ethernet address (Hex form)
%f : The six digits of Ethernet address (Hex form)
Example: ffa142
Example: 0000f0ffa142
81