Operating your DVD (VCR) with Remote Control
44
1
Press DVD button to set the remote to
DVD mode.
If you operate VCR, press VCR button to set the remote to VCR mode.
•
2
Press POWER button to turn on the DVD
(VCR).
3
Point the remote control toward the DVD
(VCR).
While holding down POWER button, enter
4
the code corresponding to your brand of
DVD (VCR).
If the code matches the DVD (VCR)'s code, the DVD (VCR)
•
will be turned off.
If there is more than one code listed for your DVD (VCR) in
•
the table, enter one at a time to determine which code works.
If DVD (VCR) is turned on or off when you
5
press the power button of the remote
controller, the setting is completed.
You can use DVD (VCR) POWER, VOLUME, PLAY, PAUSE,
•
STOP, SKIP, MENU and Numeric button (0~9).
The remote control may not work on some brands of DVD (VCR)s.
•
Also, some operations may not be possible depending on your brand
of DVD (VCR).
The remote control will work with Samsung DVDs (VCRs) by default.
•