Philips 24BDL4151T User Manual page 18

1.3.4. Installing the 4G Module.
1. Insert the flat head screwdriver to the gap of rear cover slightly as
shown.
2. Open the rear cover slightly.
3. Installing the 4G module board with 2PCS of screws.
4. Connect the 4G antenna cables to the connectors on the board.
5. Installing back the rear cover.
1.3.5. Mounting the display to the wall.
1. Wall mount holes grid: 100mm(H) x 100mm(V)
2. Wall mount screw: M4x(14+X) (X=thickness of wall mount plate)
1.3.6. Using of the wire clampers.
3
24BDL4151T